Totalpris:  0,00 DKK

Vis kurv

Icom IC-F1000/IC-F2000

Icom IC-F1000/IC-F2000

Del med dine venner


Bedømmelse af Icom IC-F1000/IC-F2000
Bedømmelse: 4.2 ud af 5 baseret på 5 stemmer
Vare nr.  Icom IC-F1000/IC-F2000

Kontakt os for pris!
  • Vælg variant

    - Vælg mellem VHF og UHF
    - Vælg mellem tre tastaturtyper

    Compact, Slim Dimensions IP67 Waterproofing and Full of Useful Features

    IP67 Waterproof and Dust-tight Protection

    The IC-F1000 series has a 24.5mm slim depth with IP67 waterproof casing. The transceiver can withstand 1m depth of water for 30 minutes. Its dust-tight construction prevents the ingress of powder dust, sand, mud and other objects.


    Enhanced Emergency with Built-in Motion Sensor

    With a built-in motion sensor, the ICF1000 series can detect its position, state of motion and non-motion and can send an emergency signal. The motion function detects if the transceiver is moving or shaking, for example, during a chase. The lone worker and man down functions are programmable.

    Easy to Hear in a Noisy Environment

    The large 36mm speaker of the transceiver provides clear companded 800 mW* audio. The built-in BTL amplifier doubles the audio output power and delivers loud and intelligible voice to a radio operator working in noisy environments.

    * Typical with internal speaker

    Inversion Voice Scrambler

    The built-in inversion voice scrambler provides secure conversation. Up to 16 codes are selectable.

    14 Hours of Operating Time with Supplied Waterproof Battery

    The supplied waterproof Li-Ion battery pack, BP-279 (7.2V DC, 1485mAh), provides 14 hours* of operating time.

    * Tx:Rx:Standby=5:5:90. Power save function ON.


    Quiet Stand-by and More

    The IC-F1000 series has built-in 2-Tone, 5-Tone, CTCSS and DTCS signaling capabilities for group communication and selective calling.

    MDC 1200 Compatible

    The following MDC features are programmable.

    - PTT ID
    - Emergency (No ACK transmission)
    - Radio check (RX only)
    - Stun/Revive (RX only)
    - Transmit status messages (LCD types only)
    - 100 alias table (LCD types only)

    Channel Announcement

    When you rotate the channel knob, the radio announces the channel number.
    Convenient for making radio adjustments without having to look at the radio.

    Other Features

    - 8 DTMF autodial memories
    - BIIS PTT ID and emergency call
    - “Shift key” function increases number of programmable key assignments
    - Surveillance function
    - Escalating alarm
    - Optional HM-168LWP, waterproof speaker-mic

    Supplied accessories

    - Battery pack, BP-279
    - Desktop charger, BC-213
    - AC adapter, BC-123S
    - Belt clip, MB-133
    - Antenna

    *May differ depending on version





    Frequency coverage
    (Varies according to version)
    Number of channels IC-F1000
    16 channels
    128 channels
    Type of emission
    Power supply requirement
    7.5V DC
    Current drain Tx High
    Rx Stand-by
    Max. audio
    (Internal SP)
    Antenna impedance
    Operating temperature range
    (Radio only)
    –25°C to +55°C
    (projections not included; W×H×D)
    (With BP-279)
    Weight (approx.)
    (With BP-279)




    RF output power (at 7.2V DC)
    5W, 2W, 1W
    (Hi, L2, L1)
    4W, 2W, 1W
    (Hi, L2, L1)
    Max. frequency deviation (W/M/N)
    ± 5.0kHz/±4.0kHz/±2.5kHz
    Spurious emissions
    0.25μW (≤ 1GHz), 1.0μW (> 1GHz)
    Frequency stability
    Audio harmonic distortion (W/M/N)
    1.0%/1.0%/1.5% typ.
    (AF 1kHz 40% deviation)
    Residual modulations (W/M/N)
    45/43/40dB min. (With CCITT filter)
    Ext. microphone connector
    3-conductor 2.5 (d) mm (1/10ʺ)/2.2kΩ




    –4dBμV typ. emf (at 20dB SINAD)
    Adjacent channel selectivity (W/M/N)
    70/70/40dB min.
    Spurious response rejection
    70dB min.
    Intermodulation rejection
    65dB min.
    Hum and noise (W/M/N)
    45/43/40dB min.
    (Without CCITT filter)
    AF output power
    (at 5% distortion)
    Internal SP
    800mW typ.(With 12Ω load)
    External SP
    400mW typ.(With 8Ω load)
    Ext. speaker connector
    2-conductor 3.5 (d) mm (1⁄8ʺ)/8Ω
    Measurements made in accordance with EN 300-086 (EUR).
    All stated specifications are subject to change without notice or obligation.